Autenticação

Utilizador:

Senha:

Iniciar sessão

Esqueceu-se da senha?

Digital Systems I

Code:

VE04

Sigla:

SD I

Áreas Científicas
Classificação	Área Científica
CNAEF	Electronics and automation

Ocorrência: 2022/2023 - 1S

Ativa?	Yes
Página Web:	https://moodle.ips.pt/2223/course/view.php?id=1308
Unidade Responsável:	Departamento de Engenharia Eletrotécnica
Curso/CE Responsável:	Professional Technical Higher Education Courses in Electric Vehicles

Ciclos de Estudo/Cursos

Sigla	Nº de Estudantes	Plano de Estudos	Anos Curriculares	Créditos UCN	Créditos ECTS	Horas de Contacto	Horas Totais
TSPVE	29	Plano de Estudos_2015_16	1	-	6	60	162

Língua de trabalho

Portuguese

Objetivos

Provide students with in-depth knowledge of digital systems as well as their control through synchronous state machines.

Familiarize students with breadboarding techniques and the most common TTL and CMOS digital components. Familiarize students with a development platform for programmed logic, circuit simulation, and development of circuit synthesis and analysis capabilities. Instill in students the ability to develop projects independently, to carry out group work and to organize the work environment.

Resultados de aprendizagem e competências

.

Modo de trabalho

Presencial

Pré-requisitos (conhecimentos prévios) e co-requisitos (conhecimentos simultâneos)

Basic knowledge of electricity.

Programa

1. Variables and Logic Functions: Variables and Logic Functions; Logical Operators; Representation of Logical Functions; Boolean algebra; Circuits with NAND, NOR and AOI Gates; Standard forms.
2. Synthesis and optimization of Boolean Functions: Algebraic Manipulation; Karnaugh maps; Functions with Incomplete Specification.
3. Basic Combinatorial Circuits: Encoders, Decoders and Transcoders; Multiplexers and Demultiplexers.
4. Basic Sequential Circuits: Static Latch and Dynamic Latch; Flip-Flops Master-Slave, JK Edge-Triggered, D and T.
5. Registers and Counters: Registers and Data Transfer Between Registers; Shift Registers; Ring counters; Synchronous Binary Counters; Asynchronous Counters; Temporal Characterization and Comparison.
6. Synchronous Sequential Circuits: Moore State Machines; Mealy States Machines; Elimination of Redundant States.

Bibliografia Obrigatória

Morgado Dias; SISTEMAS DIGITAIS - PRINCÍPIOS E PRÁTICA, FCA, 2013. ISBN: 978-972-722-700-6 (https://www.fca.pt/pt/catalogo/informatica/hardware-arquitetura-de-computadores/sistemas-digitais/)

Bibliografia Complementar

Stephen Brown and Zvonko Vranesic; Fundamentals of Digital Logic with Verilog Design, McGraw Hill, 2014. ISBN: 9780073380544 (https://www.mheducation.com/highered/product/fundamentals-digital-logic-verilog-design-brown-vranesic/M9780073380544.html)
GUILHERME ARROZ, JOSÉ MONTEIRO, ARLINDO OLIVEIRA; ARQUITECTURA DE COMPUTADORES: DOS SISTEMAS DIGITAIS AOS MICROPROCESSADORES, ISTPress, 2020. ISBN: 978-972-8469-54-2 (https://www.worldscientific.com/worldscibooks/10.1142/10940)

Métodos de ensino e atividades de aprendizagem

Theoretical-practical classes:
In these classes, the concepts of each of the program's themes are taught. Illustrative examples of the different subjects are developed and application exercises are carried out in order to consolidate the methodology suitable for different situations. Various activities are also carried out to consolidate the acquired knowledge. These activities include solving additional exercises, participating in discussion forums and answering questions, consulting supplementary materials and conducting micro-tests.
Laboratory classes:
At the same time, laboratory classes take place where the student performs tasks to apply the knowledge acquired in theoretical-practical classes. A part of the laboratory classes is intended to carry out a project in which one intends to use one of the learned control techniques.

Software

https://digilent.com/shop/software/digilent-waveforms/
https://www.kicad.org/

Tipo de avaliação

Evaluation with final exam

Componentes de Avaliação

Designation	Peso (%)
Defesa pública de dissertação, de relatório de projeto ou estágio, ou de tese	30,00
Teste	50,00
Trabalho laboratorial	20,00
Total:	100,00

Componentes de Ocupação

Designation	Tempo (Horas)
Apresentação/discussão de um trabalho científico	2,00
Elaboração de projeto	20,00
Estudo autónomo	50,00
Frequência das aulas	60,00
Trabalho laboratorial	30,00
Total:	162,00

Obtenção de frequência

There are two assessment components: a theoretical (T) and a practical (P). Theoretical assessment can be obtained by taking 3 mini-tests (MT) throughout the semester or, for students excluded from continuous assessment, by an exam (Ex) at the end of the semester.
It is not possible to take more than one test on each assessment date, so a student who fails any of the mini-tests will only be able to recover these tests on the exam date. The theoretical grade results from the average of the mini-tests or the exam grade and is a value presented to 2 decimal places.

The practical assessment consists of laboratory assignments (L) and a final project (PF), work that must be original and elaborated with the active participation of all members of the group that the student is part of. Note: the number of laboratory assignments depends on the academic calendar according to the plan presented to the students.
Each laboratory work is evaluated based on the student's performance in preparing the work and in the respective classes, the report presented and the final discussion.
The practical assessment is determined by the weighted average of the classification obtained in each laboratory work and in the project and is presented to 2 decimal places.
This component of the assessment will only be completed when the established deadlines are met and after all components and other materials required by the laboratory have been returned.
Failure to deliver or fail any of the laboratory work or fail to complete or fail the final project will result in failure in the course.
For students who are excluded from continuous assessment, at the time this form is written, there is no alternative for obtaining the practical assessment necessary for success in this curricular unit. Within a maximum period of 15 consecutive days after exclusion from continuous assessment until the last 15 days of classes, these students will have to contact the person responsible for the UC to find a solution that enables the completion of the practical assessment in due time.
The minimum score in each of the assessment instruments is 9.50 points.

Fórmula de cálculo da classificação final

NF = 0.5 x T + 0.5 x P
on what:
T = MAX((mT1 + mT2 + mT3) / 3; Ex)
P = 0.4 x AVERAGE(Wx) + 0.6 x PF
with T>=9.50; Lx>=9.50 (for all x); PF>= 9.50
Key:
NF - Final Grade
T - Exam grade or mini-test average (see note 1)
P - Practical component grade
mTx - Mini-test score x (see note 1)
Lx - Laboratory work grade x (see note 2)
PF - Course Final Project Grade
Notes:
(1) In case the theoretical assessment is based on mini-tests, all of them must have a classification equal to or greater than 9.50. The same applies to the classification obtained by examination.
(2) All works must have a grade equal to or greater than 9.50 values.
(3) According to the valuation regulation currently in force, all installments are presented with 2 decimal places except for the final grade (NF) which is rounded to the nearest unit.

Provas e trabalhos especiais

The holding of tests in a special period for final year students, working students and association leaders, is subject to registration at the Academic Services as per current regulations. The eventual holding of a special period exam only contributes to the theoretical component of the assessment. Students interested in carrying out the practical assessment at this time will have to inform the responsible teacher of their intention until the last day of classes to define the schedule and establish the project's statement.

Avaliação especial (TE, DA, ...)

Working Students, High Competition Athletes, Associative Managers and Students under the Law of Religious Freedom must contact the person responsible for the UC, during the first fortnight of classes, to present their relevant specificities, as provided for in the respective legal diplomas.

Melhoria de classificação

Taking exams for improvement purposes is subject to registration at the Academic Services in accordance to current regulations. The improvement of the grade focuses only on the theoretical component of the assessment.

Observações

Attendance:
Based on the ESTSetúbal/IPS Student Development Assessment Regulation, the Pedagogical Council decided that, in order to carry out a course in continuous assessment, the student must be present in a minimum percentage of 75% of classes (by type).

Course Moodle page:
Enrollment on the course's Moodle page is mandatory in order to access the materials available and to access the various assessment tools (mini-tests, practical assignments and exams).

Rules for taking tests:
The rules for carrying out the Final Project and for taking Minitests/Exams are available for consultation on the course's Moodle page wich is mandatory.

Repeat students:
Students who have failed but who have obtained a positive assessment in any of the components (theoretical or practical) in the past year may be exempted from taking that component this year. For this, they must send an email to the person responsible for the course, during the first fortnight of classes, declaring their intention to keep the grade of the previous year. However, if the student chooses to retake any test of the component previously approved, the classification of the previous year is immediately forgotten, prevailing the one obtained in the current year.