Autenticação

Utilizador:

Senha:

Iniciar sessão

Esqueceu-se da senha?

Fluid Mechanics

Code:

MIS08

Sigla:

MF

Áreas Científicas
Classificação	Área Científica
OFICIAL	Fisica

Ocorrência: 2023/2024 - 2S

Ativa?	Yes
Unidade Responsável:	Departamento de Engenharia Mecânica
Curso/CE Responsável:	Professional Technical Higher Education Course in Industrial Maintenance

Ciclos de Estudo/Cursos

Sigla	Nº de Estudantes	Plano de Estudos	Anos Curriculares	Créditos UCN	Créditos ECTS	Horas de Contacto	Horas Totais
TSPMIS	11	Plano de Estudos	1	-	6	60	162

Língua de trabalho

Portuguese

Objetivos

The main objective of this UC is to develop the student’s interest in the study of fluid mechanics, in  order to know the main subjects of statics, kinematic and dynamics of fluids to solve the most common problems that arise in engineering.

Resultados de aprendizagem e competências

At the end of the course, students should be able to:
- Know the principles of hydrostatics, kinematics and fluid dynamics and apply them to practical cases;
- Develop critical thinking and analysis regarding the physical phenomena addressed;
- Assess the problems and data available to solve practical situations;
- Interpret the results obtained and analyze if they are close to expected;
- Design simple installations for the movement and distribution of fluids;
- Explain the procedures adopted in the laboratories and the results obtained in the tests carried out;
- Effectively communicate the results and conclusions of the work carried out to third parties;
- Be part of a working group and be able to coordinate it.

Modo de trabalho

Presencial

Pré-requisitos (conhecimentos prévios) e co-requisitos (conhecimentos simultâneos)

Knowledge of Mathematics and Physics (Mechanics).

Programa

1. Introductory concepts
- Basic laws of physics; Notion of volume and mass flow; Thermodynamic properties of fluids
2. Viscosity of fluids
- Dynamic and kinematic viscosity
3. Pressure distribution in a fluid
- Pascal's Law; Pressure and pressure gradient; Fundamental equation of hydrostatics; hydrostatic forces on flat surfaces; Bouancy
4. Fluid flow
- Continuity, Bernoulli and energy equations
5. Flow regimes
- Laminar and turbulent flow; Reynolds number; speed profiles
6. Viscous flow in pipelines
- Friction losses; Minor losses; Systems-head curve
7. Application and selection of pumps and fans
- Types of machines; Characteristic curves; Selection; Association; Cavitation

Bibliografia Obrigatória

Robert L. Mott ; Joseph A. Untener; Applied Fluid Mechanics, 7th Edition, Pearson Education Limited, 2016. ISBN: 978-1-292-01961-1 (Book available at ESTSetúbal/IPS Library)
Luís Adriano Oliveira ; António Gameiro Lopes; Mecânica dos Fluidos, 5ª Edição, LIDEL - Edições Técnicas, Lda, 2016. ISBN: 978-989-752-221-5 (Book available at ESTSetúbal/IPS Library)

Bibliografia Complementar

Cengel, Yunus A. ; Cimbala, John M.; Mecânica dos Fluidos - Fundamentos e Aplicações, Mc Graw-Hill, 2015. ISBN: 9788580554908 (There are previous versions in the ESTSetúbal/IPS Library)

Métodos de ensino e atividades de aprendizagem

- Theoretical-Practical classes (3.0h per week): expository and participatory method (using a video projector to present the contents, films and exercises) and participatory method (with solving practical problems by the students).
- Practical-Laboratory classes (1.0h per week): experimental method (laboratory test on the phenomena taught in theoretical-practical classes).

Laboratory tests complement concepts introduced in theoretical-practical classes, allow contact with equipment and real situations. Laboratory tests reports are drawn up. The work is carried out in groups, which allows the acquisition of skills in collaborative work, communication and leadership.
The Moodle platform will be used to provide content, to interact with students and to support assessment.

Tipo de avaliação

Distributed evaluation without final exam

Componentes de Avaliação

Designation	Peso (%)
Teste	75,00
Trabalho laboratorial	25,00
Total:	100,00

Componentes de Ocupação

Designation	Tempo (Horas)
Estudo autónomo	87,00
Frequência das aulas	60,00
Trabalho laboratorial	15,00
Total:	162,00

Obtenção de frequência

- Attendance to classes is mandatory, in accordance with the attendance regime approved by the Pedagogical Council.

In order to comply with the provisions of the 'Regulation of Academic Activities of the IPS', students benefiting from one of the statutes provided for in the regulation, who are unable to attend some laboratories classes, must inform the teacher or the person in charge of the curricular unit to be programmed to carry out the extraordinary laboratory work. In order to optimize human and laboratory resources, the request to carry out extraordinary laboratory work, under the Student Statute, must be requested in writing to the person responsible for the course unit up to one week before the performance of the Laboratory Work in question. Requests received after the deadline will not be accepted.

- The test rating must be equal to or greater than 7.0V;
- The arithmetic mean of the classification of the Tests or Exam must be equal to or greater than 9.5V.

Fórmula de cálculo da classificação final

* Continuous evaluation:
- Two tests (75%) - Minimum rating of 7.0V; Minimum arithmetic mean: 9.5V
- Laboratory work (25%) - Minimum grade for each laboratory: 9.5V

FG=0.75xMTG+0.25xMLG

* Final evaluation:
- Final exam (75%) - Minimum grade of 9.5V
- Laboratory work (25%) - Minimum grade for each laboratory: 9.5V

FG=0.75xMTG+0.25xMLG

Avaliação especial (TE, DA, ...)

Students with special statutes must inform the RUC at the beginning of the semester in order to agree on a plan for attendance/follow-up of laboratory classes to allow the application of the UC assessment rules.

Melhoria de classificação

The classification improvement will be performed by exam only, with access to the exam according to the rules defined in the RAA-IPS.

Observações

- Attendance at laboratory activities is mandatory. In case of impossibility to be present, the student must contact the Teacher in advance;
- The laboratory work reports are returned to the group for improvement, if they have not reached the minimum grade;
- Students who do not have all the reports approved during the continuous assessment period have the possibility to deliver the reports not accepted until the date of the exams;
- If the student does not obtain the minimum grade in one of the tests, he/she can recover that test on the date defined by the Pedagogical Council for the evaluation of the normal period.
- The weekly time for answering doubts/questions will be published on the UC page in Moodle.dle.

- Students who obtain a final grade greater than or equal to 16 values ​​must perform a oral verification, otherwise the grade will be 14 values.

>> In written evaluations, only non-programmable scientific calculators can be used and there will be restricted consultation - Tables and formulas sheet provided.